แคสเตอร์สแตนเลสสตีล (RM-Clean)

Stainless steel swivel caster with a polished stainless bracket

ซีรีส์ RM-Clean ผลิตโครง เพลา และ (เป็นตัวเลือก) ล้อในสแตนเลสสตีล แคสเตอร์จึงรอดจากการล้างแรงดันสูง พ่นละอองเกลือ และสารเคมีทำความสะอาดโดยไม่ติดขัดหรือเป็นสนิม

การใช้งานทั่วไป: สายการผลิตอาหาร ห้องเย็น ห้องสะอาดเภสัชภัณฑ์ เครื่องมือแพทย์ และสภาพแวดล้อมใกล้ทะเล

หน้ายางล้อถูกเลือกตามสภาพแวดล้อม — PU ระดับใช้กับอาหาร ไนลอนทนอุณหภูมิสูง หรือฟีนอลิก — เพราะสแตนเลสปกป้องโครง ไม่ใช่พอลิเมอร์ ใบรับรองวัสดุและบันทึกการทดสอบประจำล็อตจัดเตรียมให้ตามคำขอ

ข้อมูลจำเพาะ

  • SS304 เป็นมาตรฐาน, SS316 สำหรับสภาพแวดล้อมที่มีคลอไรด์สูง
  • โครง รางแบริ่ง เพลา และอุปกรณ์ประกอบสแตนเลส — ไม่มีตัวยึดเกิดสนิมในเส้นทางรับน้ำหนัก
  • ทดสอบพ่นละอองเกลือภายในโรงงาน
  • มีตัวเลือกล้อระดับอาหารและทนอุณหภูมิสูง

การเคลือบผิว

สแตนเลสสตีลผ่านการ passivation

Bracket finishWhat it doesSpecify it when
Zinc plating (blue/white)Baseline corrosion protectionStandard dry indoor use
Chrome platingHard, decorative, easy to cleanVisible / cleanroom-adjacent equipment
Powder coatingCustom color, good corrosion resistanceBrand colors, outdoor-adjacent use
Stainless steel 304No plating to failWashdown, food, medical
Stainless steel 316Resists chloridesSalt, brine, marine air, harsh cleaning chemicals

การทดสอบ

ห้องทดสอบพ่นละอองเกลือในสถานที่; ใบรับรองวัสดุตามคำขอ

Selection factorRule of thumbEffect on performance
Load sizingTotal load ÷ 3 (not ÷ 4)On uneven floors only three wheels carry the cart
Wheel diameterBigger rolls easierLarger wheels cut push force and bridge gaps
Tread hardnessSofter = quieter, harder = easier rollingPick the softest tread that carries the load
Bearing choicePrecision ball for manual pushing, roller for heavy loadsBearings dominate rolling resistance at high load
Swivel vs rigid2 swivel + 2 rigid is the standard cart setupAll-swivel carts wander; all-rigid carts cannot steer
Floor conditionRough floors need bigger wheels and softer treadsSmall hard wheels on bad floors destroy both

Capability commitments on this page are owner-confirmed (2026-09-29).