Poliüretan (PU) Makara Tekerlekleri

Swivel caster with a polyurethane-treaded wheel on a steel core

Poliüretan, naylona yakın yük kapasitesi gerekli ama boyalı beton veya epoksi zeminin korunması gerektiğinde varsayılan tercihtir. RollMaster PU tekerleri gri dökme demir ve çelik göbekler üzerinde kendi tesisimizde döker.

PU tekerlekler düşük yuvarlanma direnci, iyi tutuş, sessiz çalışma ve yağlara ve birçok kimyasala direnç sunar — AGV/AMR platformları ve kapalı alan malzeme taşıması için standart teker.

Teknik Özellikler

  • Standart Shore sertliği 92A–95A, talebe göre diğer karışımlar
  • Tesis içinde enjeksiyon ve döküm PU üretim hatları
  • İz bırakmayan gri ve kırmızı karışımlar mevcut
  • Tipik sıcaklık aralığı -20 °C ile +80 °C

Yüzey işlemleri

Galvaniz kaplı veya paslanmaz braketler

Bracket finishWhat it doesSpecify it when
Zinc plating (blue/white)Baseline corrosion protectionStandard dry indoor use
Chrome platingHard, decorative, easy to cleanVisible / cleanroom-adjacent equipment
Powder coatingCustom color, good corrosion resistanceBrand colors, outdoor-adjacent use
Stainless steel 304No plating to failWashdown, food, medical
Stainless steel 316Resists chloridesSalt, brine, marine air, harsh cleaning chemicals

Test

PU-göbek yapışması ve sertlik parti bazında kontrol edilir

Selection factorRule of thumbEffect on performance
Load sizingTotal load ÷ 3 (not ÷ 4)On uneven floors only three wheels carry the cart
Wheel diameterBigger rolls easierLarger wheels cut push force and bridge gaps
Tread hardnessSofter = quieter, harder = easier rollingPick the softest tread that carries the load
Bearing choicePrecision ball for manual pushing, roller for heavy loadsBearings dominate rolling resistance at high load
Swivel vs rigid2 swivel + 2 rigid is the standard cart setupAll-swivel carts wander; all-rigid carts cannot steer
Floor conditionRough floors need bigger wheels and softer treadsSmall hard wheels on bad floors destroy both

Capability commitments on this page are owner-confirmed (2026-09-29).