عجلات الفولاذ المطروق تحمل أعلى الأحمال بين كل مواد الأطباق، وتقاوم الحرارة ورشاشات اللحام والبرادة وتلف الأرضيات الذي يدمر العجلات البوليمرية.
ومقترنة بحوامل ملحومة بمقاطع ثقيلة تشكّل سلسلة RM-Extreme لأقسى أرضيات المصانع.
المقايضة هي الأرضية والضجيج: الفولاذ لا يوفر وسادة امتصاص، فهو ينتمي إلى أرضيات فولاذية أصلًا، أو خرسانة بالية بشدة، أو سكك حديدية — لا إلى الأرضيات المشطوبة. وحيث يبقى توزيع الحمل مهمًا، تقلّل التصاميم المطروقة ثنائية العجلة الحمل النقطي.
المواصفات
- سعة حمل حتى 2000 كجم للكاستور
- أطباق مطروقة ومشغولة للتدحرج المتحاذي محوريًا
- مقاومة للحرارة مع مزلق عالي الحرارة
- خيارات محامل دقيقة: كريات، وأسطوانية، وانزلاقية
التشطيبات
كما هو بعد الطرق، أو مجلفن، أو مصبوغ
| Bracket finish | What it does | Specify it when |
|---|---|---|
| Zinc plating (blue/white) | Baseline corrosion protection | Standard dry indoor use |
| Chrome plating | Hard, decorative, easy to clean | Visible / cleanroom-adjacent equipment |
| Powder coating | Custom color, good corrosion resistance | Brand colors, outdoor-adjacent use |
| Stainless steel 304 | No plating to fail | Washdown, food, medical |
| Stainless steel 316 | Resists chlorides | Salt, brine, marine air, harsh cleaning chemicals |
الاختبار
تلاحم المطب مشغول؛ واختبار حمل ساكن
| Selection factor | Rule of thumb | Effect on performance |
|---|---|---|
| Load sizing | Total load ÷ 3 (not ÷ 4) | On uneven floors only three wheels carry the cart |
| Wheel diameter | Bigger rolls easier | Larger wheels cut push force and bridge gaps |
| Tread hardness | Softer = quieter, harder = easier rolling | Pick the softest tread that carries the load |
| Bearing choice | Precision ball for manual pushing, roller for heavy loads | Bearings dominate rolling resistance at high load |
| Swivel vs rigid | 2 swivel + 2 rigid is the standard cart setup | All-swivel carts wander; all-rigid carts cannot steer |
| Floor condition | Rough floors need bigger wheels and softer treads | Small hard wheels on bad floors destroy both |
Capability commitments on this page are owner-confirmed (2026-09-29).